Previous Topic: MVS CICS Tab

Next Topic: MVS TSO 2 Tab


MVS TSO 1 Tab

Use this tab to identify the logonID record information about the default values that are in force when the user logs onto TSO.

You must have the appropriate authority, as listed in the @CFDE entry, to update a field. This authority is usually the SECURITY or ACCOUNT privilege.

The fields in this tab are listed below:

Default Logon Procedure

Specifies the user's default TSO procedure name. In CA-ACF2, this is the same as the TSOPROC logonID record field. This field is active only if UADS is bypassed.

Size/Type: 1-8 alphanumeric characters

Default Region Size (Kilobytes)

Specifies a user's default TSO region size (up to 2,147,483,647K) if no size is specified at logon time. This is a four-byte binary field. In CA-ACF2, this is the same as the TSORGN logonID record field. This field is active only if UADS is bypassed.

Size/Type: 1-10 numeric characters

Maximum Region Size (Kilobytes)

Specifies the user's maximum TSO region size in kilobytes (up to 2,147,483,647K). This is a four-byte binary field. In CA-ACF2, this is the same as the TSOSIZE logonID record field. This field is active only if UADS is bypassed.

Size/Type: 1-10 numeric characters

Default Performance Group

Specifies the user's TSO performance group. You can specify a value from 0-255. A zero indicates that no performance group is specified. This is a one-byte binary field. In CA-ACF2, this is the same as the TSOPERF logonID record field. This field is active only if UADS is bypassed.

Size/Type: 1-3 numeric characters

Default Time

Specifies the user's default TSO time parameter. This is a two-byte binary field. In CA-ACF2, this is the same as the TSOTIME logonID record field. This field is active only if UADS is bypassed.

Size/Type: 1-4 numeric characters

Command List Module

Specifies the name of a TSO Command List module that contains a list of the commands that this user can issue. You cannot mask this field. You can apply command limiting to all logonIDs and in all modes except for QUIET.

In CA-ACF2, this is the same as the TSOCMDS logonID record field.

Size/Type: 1-8 alphanumeric characters

Default Prefix

Specifies the default TSO prefix that is set in the user's profile at logon. CA-ACF2 uses this prefix as the user's high-level index. If this field displays a period (.), CA-ACF2 does not use this prefix as the user's high-level index and the user must always enter a fully qualified file name.

The security administrator who updates this field must not have a scope record that restricts access to assets with the high-level index specified in this field.

In CA-ACF2, this is the same as the DFT-PFX logonID record field. This field is active only if UADs is bypassed.

Size/Type: 1-8 alphanumeric characters

ATTR2

Specifies the PSCBATR2 field the IBM Program Control Facility (PCF) uses for command limiting and file protection. The default is zero (no PCF controls). This field consists of two hexadecimal bytes.

This field is active only if UADS is bypassed. You can change the default if the user's logonID record is created with UADS in effect, if the user's logonID record is copied from a model logonID record, or if a new value is inserted. CA-ACF2 also has an option for TSO command limiting.

Size/Type: 1-4 alphanumeric characters

Delete Character

Specifies the user's character-delete symbol. This can be one of the following:

In CA-ACF2, this is the same as the CHAR logonID record field. This field is active only if UADS is bypassed.

Size/Type: 1-2 alphanumeric characters

Line Delete Character

Specifies the user's line-delete symbol. This can be one of the following:

In CA-ACF2, this is the same as the LINE logonID record field. This field is active only if UADS is bypassed.

Size/Type: 1 alphanumeric character

Submit Hold

Specifies the default TSO submit hold class. Specify this field only for TSO or TSO/E Command Package Product.

In CA-ACF2, this is the same as the DFT-SUBH logonID record field. This field is active only if UADS is bypassed.

Size/Type: 1 alphanumeric character

Submit Message

Specifies the default TSO submit message class. Specify this field only for TSO or TSO/E Command Package Product.

In CA-ACF2, this is the same as the DFT-SUBM logonID record field.

Size/Type: 1 alphanumeric character

Default Job

Specifies the default TSO job class. Specify this field only for TSO or TSO/E Command Package Product.

In CA-ACF2, this is the same as the DFT-SUBC logonID record field. This field is active only if UADS is bypassed.

Size/Type: 1 alphanumeric character

Sysout

Specifies the default TSO Sysout class. Specify this field only for TSO or TSO/E Command Package Product.

In CA-ACF2, this is the same as the DFT-SOUT logonID record field.

Size/Type: 1 alphanumeric character

Account

Specifies the system-wide default TSO account number, which must be 1 or 0. The default value is 1. In CA-ACF2, this is the same as the ACCOUNT logonID record field.

Allocation Unit

Specifies the user's default TSO unit name.

In CA-ACF2, this is the same as the TSOUNIT logonID record field. This field is active only if UADS is bypassed.

Size/Type: 1-8 alphanumeric characters

Mail Index RBA

Specifies the Mail Index Record Pointer (MIRP) for the selected user. This pointer is for use only with TSO/E. CA-ACF2 automatically sets this value.

In CA-ACF2, this is the same as the TSORBA logonID record field. This field is active only if UADS is bypassed.

Size/Type: 1-6 hexadecimal characters

Output Destination

Specifies the default remote destination for TSO spun Sysout files.

In CA-ACF2, this is the same as the DFT-DEST logonID record field. This field is active only if UADS is bypassed.

Size/Type: 1-8 alphanumeric characters